| INPUT SPECIFICATION |
| Voltage Range |
100-120VAC |
| 200-240VAC |
| Frequency Range |
47-63Hz |
| Efficiency |
MS-60-5: 80% |
| AC Current(typ.) |
0.8A / 230VAC |
| Inrush Current(typ.) |
30A / 115VAC (for cold start at 250C) |
| Leakage Current |
<1mA / 240VAC |
| |
|
| OUTPUT SPECIFICATION |
| Rated Current |
MS-60-5: 12A |
| Rated Power |
60Watts |
| Voltage ADJ. Range |
 10% (with V.ADJ) |
| Voltage Tolerance |
1% |
| Ripple & Noise(Max) |
MS-60-5: 80mVp-p |
| Setup Time |
600ms / 230VAC |
| Rise Time |
30ms / 230VAC |
| Hold Time(typ.) |
20ms / 230VAC |
| |
|
| PROTECTION |
| Overload |
100% to 110% rated load current |
| Protection Type: Hiccup mode, Recovers Automatically after fault condition is removed |
| Overvoltage |
Protection Type: Shutdown output voltage, re-power on to recover |
| |
|
| ENVIRONMENT |
| Working Temperature |
-100C to 600C (derating is required according to temperature) |
| Working Humidity |
20% to 90% RH |
| Storage Temperature |
-200C to 850C (with no icing or condensation) |
| Storage Humidity |
10% ~ 95% RH |
| Vibration Resistance |
10 to 500Hz, 10min/1cycle (2G) for 60 minutes each in X,Y,Z directions |
| |
|
| SECURITY |
| Isolation Resistance |
I/P and O/P ; I/P and FG ; O/P and FG :100MΩ at 500VDC, 250C, 70% RH |
| Dielectric Strength |
Between I/P and O/P : 1.5kVAC for 1 min |
| Between I/P and F.G : 1.5kVAC for 1 min |
| Between O/P and F.G : 0.5kVAC for 1 min |
| |
|
| STANDARDS |
| Safety Standards |
Accord with UL1012 |
| EMC Standards |
Meet the EN55022 CLASS A Equipment |